Experience the Power of Clean
Why hot flush?
Failure to remove contamination from the cooler and lines equals transmission or engine failure. A common solution for this age-old problem would be to install a new cooler.
What you don't know is you're wasting time and money. The majority of new coolers are contaminated. After a new cooler is manufactured, it is left with debris and flux that will eventually work its way into your transmission or engine.
To ensure 99.9% contamination removal of the cooler and lines, the Hot Flush system delivers an automated process that utilizes reverse flushing. This process combined with a checkable 28 micron screen , air-injection and absolute filtering that will assure your system is 99.99% clean.
Additionally, flushing should also be performed as a diagnostic point in a proactive maintenance schedule to detect problems before they become catastrophic.
Debris from a new OEM cooler
Independent Tests
The Hot Flush machine was tested by an independent party. The Hot Flush machine and a competitor’s flushing machine were tested on coolers that had been removed from vehicles with transmission failures.
The test was unique in that it allowed the competition device to clean the cooler first. Next, the Hot Flush machine was used on the same transmission after the competition had cleaned it. The results of these tests really speak for themselves.
Even after the competition flushed the transmission cooler (and not much was removed) Hot Flush was able to extract a drastic amount of debris that had been missed. This is a great, quick visual illustration of why Hot Flush is such a necessary addition to your oil cooler / heat exchanger maintenance routine.
